Nose Piercings - Nostril, Septum, and Bridge Piercings

Nose piercings are extremely popular throughout the world. The nostril piercings are the most popular, although there is a surge in septum (properly called the nasal septum) piercings too; Bridge Piercings, located between the eyes, are still very rare. No matter which nose piercings you desire, all have the potential to frame your face and emphasize your features beautifully.

Nostril piercings are as old as humankind. Many cultures pierce their noses for varying reasons, be it for warrior status, child-bearing help, religious references, or coming of age rites, people have been piercing their noses for longer than recorded history. In America, nostril piercings are a relatively new fad - the first groups of people to get their noses pierced were hippies returning from sojourns in India and followers of "punk rock", so the initial impression of nostril piercings was that of a disestablishmentarianism feel. Today, having a nostril pierced is hardly considered "punk" or "rebellious" and an increasing amount of workplaces allow for nostril piercings; out of all facial piercings, this is probably one of the piercings to achieve benign responses from older or more traditional members of society.

Both nostrils can be pierced and the side you get pierced is really a matter of your personal preference. You and your piercer will decide on which jewelry is appropriate for your lifestyle (and the initial jewelry used for the piercing may not be what you have in mind) and which jewelry will best accommodate your face for the inevitable subsequent swelling. The piercer may choose the best location for your new jewelry by asking you to flare your nostrils. The best looking nose jewelry is located in the crease that become apparent during flaring and in this location you minimize your chances of accidentally ripping out your new piercing!

The Septum piercing is located, well, in the septum (the cartilage that separates your nostrils) and looks extremely painful. Actually, it is one of the least painful piercings you can get, for a good piercer won't actually go through the cartilage. Your piercer will pinch your septum to locate the "sweet spot" - a sliver of thin skin - and the jewelry will be placed there. Captive beads and circular barbells are usually used for the initial jewelry, and many people choose to gauge this piercing over time. If you decide to gauge, remember that the initial swelling will subside in one month to three months, so only after this allotted time can you begin the process.

Unfortunately, there are some stigmas associated with this piercing (most work environments are not friendly to it), but luckily, these piercings are easy to hide without having to remove the jewelry. If you get pierced with a circular barbell, instead of letting the ends hang downward you can swing the ends into your nose, thus hiding the piercing. Once you can safely remove the piercing, you can always buy a clear or flesh color retainer to disguise the piercing too.

Bridge Piercings are still rare but are becoming more visible in everyday culture. While this piercing is actually located on the nose, it is placed on the upper part (the bridge) of the nose right between the eyes, hence the name. If this piercing is flipped from horizontal to vertical, and lifted slightly on the nose and forehead plane, it is called a "minds eye" or "third eye" piercing (which is still very rare, and explained in my eye-area article). Bridge piercing is also called the "earl" as a tribute to the first person to wear this piercing (Earl van Aken). Bridge Piercings are contemporary of origin.

Bridge Piercings and Third Eye Piercings are considered "surface piercings" (a complete in-depth analysis of surface piercings will be provided in another article), so the risk of rejection is high, and once removed, scarring is a real possibility. Without fail, Bridge Piercings are pierced with straight barbells (rings simply won't work for an initial piercing, although once healed, a D-shaped captive ring may work). A professional piercer will tweak the jewelry so as to fit your face shape, if not create a completely customized piece of jewelry for you. While the Bridge piercings carry no risk to harm your eyes, or your sinuses, they should not be attempted by amateurs. If you are considering this piercing, be warned that the rate of complete healing is very low, and the risk of migration is very high. Not many people are able to keep this piercing, and reoccurring infections are a real risk even if you do take great care of this piercing!

As always, be sure to keep your new piercing clean with warm saline solution. Never ever touch your jewelry - your hands are absolutely covered with germs - unless you absolutely must and you have just washed your hands. By following these two simple guidelines, you will be on the right track to a quick and painless healing process.

During the first couple weeks, you may notice tenderness if you have to blow your nose. And to be completely forthright, you may notice that boogers stick to the inside of your piercing. The average healing period is eight to ten weeks, but this can be prolonged if you wear makeup, take your nose ring in and out repeatedly, partake in illegal drugs (this will definitely irritate your piercing), or smoke (tobacco is amongst the worst offenders for infection causers). After ten weeks, it should not hurt to blow your nose. Be gentle when drying your face - towels are your enemy for the first couple weeks, for jewelry can get caught on the fabric and get yanked out.

If you love the look of nose piercings but are uneasy about potential job prospects, you can (and should) buy a retainer. You are definitely not the first person to be in this conundrum, so many body jewelry manufacturers have created clear or flesh colored retainers - that is, jewelry specifically designed to maintain the integrity of your piercing while blending in with the rest of your face. These enable you to keep your nose piercings from closing up (because like most facial piercings, the holes will close relatively quickly) all while going undetected in the workplace. If you are interested in a nose piercing (or two...or three...) there is really no reason to hold back!

Do you want to know more about body piercings?...

To peruse body jewelry, body piercing news, articles, pictures, and other body modifcation information, Jewelry For Body Piercings is one of the best resources on the internet.

Click here to visit Jewelry For Body Piercings...

Beaded Curtains - Mirror Disco Ball Door Beads #61060

Beaded Curtains - Mirror Disco Ball Door Beads #61060 Review

Beaded Curtains - Mirror Disco Ball Door Beads #61060

Beaded Curtains - Mirror Disco Ball Door Beads #61060 Feature

• Beaded
• Disco Balls
• Plastic Construction
• Silver Color

"Buy Beaded Curtains - Mirror Disco Ball Door Beads #61060" Overview

These beautiful beaded curtains are perfect for door ways or to separate space in your home. Hang these Beaded curtains anywhere in your house for a decorative effect and a slight bit more privacy. Installation of these beaded curtains is easy! Simply hammer in 2 small nails or screws aligned with the mounting holes on the top bar and your good to go! The light weight construction of these curtains means no anchoring necessary and they will not fall down! This curtain features 10 72" bead strands decorated with thousands of chrome mirror disco balls that wildy reflect light for a star studed room effect and fits standard door ways up to 36". Great for bedrooms, dorm rooms and in house thresholds in between rooms!You will not be disappointed with Beaded Curtains - Mirror Disco Ball Door Beads #61060

Related Products

• 3 ft x 6 ft Iridescent Faux Crystal Beaded Curtain - Clear
• Beaded Curtains - Black Light Reactive Neon Disco Balls Door Beads #60944
• Beaded Curtains - Black Light Reactive Neon Peace Sign Door Beads #60929
• Beaded Curtains - Glow in the Dark Stars Door Beads #60879
• (20x28) Farrah Fawcett 1976 Vintage Swimsuit Movie Poster Print

For more INFORMATION

....Check price...Product Rating..Customer Reviews

Creative and Informal Beach Wedding Dress Ideas For the Bride and Groom!

There are so many fun choices that the bride can make for her beach wedding dresses when the plan is for a casual wedding. The theme sets the style of course, so the first job at hand is to decide if you want to stick to a specific theme, or simply keep it informal and casual on the day.

You can choose to be Gypsies for the day, with lots of velvet and satin. Maybe you fancy being Medieval with buntings and some fair maidens in long gowns and a horse to ride, or you might want to be a Hippie flower child with cheesecloth caftans and beads.

With a truly informal beach wedding dress you could even take the idea of Pam Anderson and wear a swimsuit in the colours you pick for the beach wedding them, and cover it with a sarong, or soft translucent caftan style sheath dress. Even the men can wear caftans over their more informal swimwear that way.

When the ceremony is over, everyone can have a swim to cool off before the reception begins! With all the attention focused on the bride when planning a wedding, it's easy to forget the other half of the happy couple. The groom and his groomsmen also need to be taken care of, especially attire-wise.

So, you are getting married in a few months and you've just chosen a beach theme for your wedding. You also want it to be a casual wedding, something which is not too formal. This calls for an informal beach wedding dress for the bride and groom, especially if you're having the wedding at the beach where practicality is more important than fashion.

So, how do you find the perfect beach wedding attire for men? Well, fortunately for you, it isn't that hard if you follow a few simple pointers.

1) Determine his type. You'll have to find out what style suits the groom. Is he tall? Is he stocky? What about his dress size? Is he a bit wide around the hips? All these questions need to be answered if you're going to find an informal beach wedding dress for the groom. A vest left unbuttoned is a great way to conceal a bit of a pot belly. Or to have a loose shirt left untucked and hanging loose over the trousers.

2) Follow the theme. Naturally, the wedding is beach-themed. However, there can be many variations of that theme. It can be tropical, where the attire should be bright and natural, or it can be nautical, with soft shades of blue and sea-like dresses. However you want the groom's wedding attire to be, you'll have to make sure it fits the theme. If you are choosing a 'flower-power' Hippie theme with beads and flowers the caftan is perfect for the men as well as the women, and are naturally flattering for all body shapes. The men can even be wearing their swimming trunks underneath for ultimate comfort and convenience. For the Tropical Island theme its simple to pick a Hawaiian style bright patterned shirt and comfortable trousers or board shorts worn with simple open sandals.

3) Don't forget to ask his opinion. It's his wedding after all. Asking for his thoughts can give you ideas on how you'll want to dress him up. Finding the perfect informal beach wedding dress won't be worth anything if he doesn't want to wear it on the wedding day. So, make sure there are clear communications between the both of you early on.

In many cases, when you look at the wedding photos of the beach wedding attire for men, you see that the men simply wear trousers with shirt unbuttoned at the neck, sometimes with a vest left open, and sandals without socks. The colors can be sand themed soft linens, or simple black trousers, white shirt and even a bright colored vest in red for example if using a bright theme, or gypsy theme for your informal beach wedding dress.

Free to Brides! Drop in to get our free ebook on "Tips for Planning your Beach Wedding" and get dozens of great ideas for your own beach wedding from a site dedicated to giving you creative Beach Wedding Ideas and also and lots of Beach Wedding Dresses designs to check out here http://www.squidoo.com/beach-wedding-dresses

Bud Vase - It's Your Show Case

Buds and blossoms are surely bell ringers of hope and joy. It will brighten our rooms and our mind in a very special way with their lovely colors and fragrance. Now what about a bud vase? A vase can be defined as a small jar which is contrived to hold many flowers which are cut, especially buds and other young flowers.

They are commonly used to show up the mince and make up of beautiful and young delicate flowers in the early months of spring season, when there may not be so much of blooms to keep. Though their classical uses were destined to roses, other aromatic blooms and simple stems will often occupy the place. Flowers and blooms essentially do have a simple elegant look if they are kept in these vases. They are best available in the hands of a florist, either with or even without flower arrangement or at home decor shops.

There are various designs available in bud vases. Any way the traditional vases always carry a narrow neck with a bulged base. These are very convenient for large arrangements since the bulb of the base could balance large blooms. Such varieties are also very common with heavy fluffy arrangements. They are available in greatly intriguing shapes and sizes.They can be made architectural depending on your creativeness and ideas. There are vases that hang on to the frame works as well those attached to beautiful hand crafts.

In majority of cases, bud vases are made water tight so as to hold nutrients for the displayed blooms. A Variety of materials which include ceramic, glass, porcelain, crystals etc are used to make the vases. There is also beaded vessels as well as lined flower baskets along with water tight vases of wood. Simple glass vases are another contemporary item which include clear glass and cut crystal bud vases as well.

You can shop for Bud vases on the internet and get huge discounts. Click here to know more about Bud vases

To Slip, Or Not To Slip

I know one of the first times I went fishing, my dad handed me a 12 foot cane pole with a weighted bobber (one of those red and white, straight wooden types with a lead weight attached to the top) and a night-crawler. I can still remember catching my first good size blue gill on that rig.

And I still have the picture to prove it.

Today, there are so many types of floats available, with at least three different ways to use each one. To keep from boring anyone, (hopefully) I will explain just a few of the best methods I know of.

Of course, the night-crawler is the oldest, most cost effective and often the best fish producing method known to anglers of all ages and experience. And how the worm is attached to the hook is one of the oldest arguments out there today.

Some say you have to ball the worm up while you thread it onto the hook. Some say you should wrap the worm around the hook while you bait it. Others like to hook their worm straight. Some anglers use minnows instead, which can also cause baiting arguments. (Through the lips, the dorsal or the tail)

Go figure.

I feel that it's up to the angler to find out witch method works the best for their location or preference. Like I always say, "Go with what works."

The night-crawler method is usually used with a stationary or "fixed" bobber. This is where the bobber is fixed to the line so it will not slide along the line. However, it's not necessarily the only way to use a hook and bobber. In some situations, the "slip" bobber can be also used with a night-crawler on your hook.

It all depends on your situation at the time or how you feel.

With the slip bobber method, you can yo-yo your bait up and down, sometimes directly above your target area. Say in and out of weed-bed pockets or brush piles.

Which brings me to the next method, using a jig or rig with a bobber. This can be very useful in targeting those fish that want to stay at certain depths because of water temperature. Or it can be used to get a stubborn fish, out of hiding, that just will not take that live bait.

To use a jig or soft-bait rig with a bobber, you just tie on your choice of either and set up the bobber just like you would with a night-crawler or a minnow. There really is no difference except that. How you use this set up is a bit different though. Instead of just casting and waiting for your bobber to disappear, you work the lure the way you would without a float, except you use the float to keep the lure at a certain depth (fixed) or to jig the lure up and down (slip) in and out of weed-bed pockets.

Traditional methods of "fixing" a bobber to a line can be very simple or very involved. It depends on how you want the bobber to work or how much effort you want to put into it. It also depends on the type of bobber.

Some types require a bead or bobber stop of some kind to stop it at a certain position. These are called "slip" bobbers. They are designed to slide or "slip" along the line so that you can change the depth of your lure and sometimes there's no need for a leader with this type.

The other and most widely used is the "fixed" bobber. This type is easier to incorporate. Generally all you have to do is attach the float to your line in the desired spot and be done with it. The bobber "holds" the line with either a spring or spring loaded wire hook and does not move. Then all you do is attach your preferred lure or bait and cast. When using a night-crawler, a "split shot" weight is attached just above the hook to give the bobber stability.

There are other methods of "fixing" a bobber to your line as well. With the round type, you can tie the line directly to the wire hook manufactured into the float and then tie a leader to the same hook. You can also attach a three way swivel to the float hook. This method keeps your line from getting twisted and can act as a counterbalance with weighted floats. You then tie your line to one eye and a leader to the other.

The purpose of using a weighted bobber is to cause the bobber to tip over at the slightest bite. This works really well when fishing for Crappie or Small-mouth bass since these two species of fish have a tendency to have a delicate bite, which can be hard to spot.

As I mentioned before, you can use a bobber with jigs or soft-bait rigs. Usually, fixed bobbers are used with jig-head lures and slip bobbers are used with soft-bait rigs. However, this is not etched in stone. By all means, experiment and "use what works" for you.

The fixed bobber method keeps your lure at a desired depth when fish won't change to strike. This is a great method if you want to keep a jig-head off the bottom while you "swim" the lure slowly, which you cannot do without a bobber. The jig sinks to fast to be slow-rolled and drags across the bottom. In some cases, this is what you want and is basically what a jig-head lure is supposed to do. But if you want to "swim" your jig-head near the bottom, the fixed bobber is what you want.

The fixed method also allows your lure to "hover" above a weed bed where fish may be hiding to attack from below. This is where the weighted bobber comes into play. When a fish takes the lure and continues to swim upward, the bobber tilts to one side, indicating a bite. Cast this set-up past the weed bed and reel it in stopping about every 18 inches or so until you clear the bed or catch a fish.

If you want to be able to hop the lure straight up and down, the slip bobber is the way to go.

The slip bobber style allows you to raise and lower the lure, in and out of tight spots, which gives your creature bait or worm a more lifelike appearance. All this can be done from a discrete distance. Just cast and let the lure drop to the bottom, then reel in slowly or lift the rod tip until the bobber moves to where you want and let the lure drop again.

The strike will usually come on the downfall, especially if you're dropping it into a spawning bed a big bass is protecting. The slip method also causes less hang-ups in most cases. The trick is to have a light touch, which will lift the lure almost straight up and out of trouble.

This method can be very useful around sunken trees or stumps, considering a bare root system can hold a number of fish. Here is where hopping the lure short distances is needed.

Both of these styles can be used on most all species of fish however, they are especially useful for drawing hidden bass and crappie out of cover. You never know this method might just win a tournament or gain you some nice bragging rights. Give it a try and as always, good fishin' to ya.

Chris Curley lives in Indianapolis, Indiana with his dogs Puranah and Princess and with his cat Sylvester.

Dividing a Room Using Hanging Curtain Room Dividers

Hanging curtain room dividers are cheap replacements for old room dividers or partitions. Aside from their very low prices, they also come in different attractive styles and designs that make for a good conversation piece. They are available in fabric, plastic, beads or drapes.

Flexibility is also another benefit of using hanging curtain room dividers. You can use them as window treatments, closet door, wall partitions or doorway covers. A curtain room divider is truly the best choice to have if you are looking for something that will be worth the value of your money. The following examples are all sold at kaboodle.com.

Chain Reaction Curtain:

This metal chain curtain can be useful as window treatment, partitions or wall hanging. The cascading, shimmering metal chains can help diffuse the view but not the light. This curtain can be suspended on any interior doorway in a loft, condominium, apartment, hospital room, churches or even a fitting room. If you plan to use this curtain as wall hanging, you will be surprised to discover that it allows the wall color to show through.

8' Long Large Diamante Diamond Cut Beaded Curtain ~ Burgundy Wine:

This multi-faceted beaded curtain features 18 strands and can be used in doorways, windows, as photo backdrops, set decorations or to liven up a blank wall. There is just endless use for this beaded curtain which has alternate two bead sizes, 3/4 -inch and 1/2-inch.

Ivory Capiz Shell Curtain:

The soft iridescent effect of the ivory shells allows this curtain to bring a dramatic effect to any room as well as create a stunning tropical look. The capiz shells are linked together to form an aesthetically pleasing curtain that helps create a peaceful and warm living environment. You have the option to use this curtain to divide a space, hang in doorway or as window treatment. The dimensions are 36 inches wide by 80 inches long.

Birds Of Paradise Bamboo Curtain:

This handcrafted bamboo curtain consists of 90 strands. It is perfect for use as a patio door, room divider, wall hanging, window treatment or interior door. As a door, this curtain allows breeze inside, screens out critters and other insects and provide shade. All sides of the curtain are hand painted. The available sizes are 34 and 1/2 inches by 79 inches.

Star Light Curtain ~ Room Divider or Window:

This beaded curtain is available in 100 different styles and colors. It is flexible when it comes to applications, allowing you to use it as room divider or window treatment. It consists of 5 strands and 40 star lights. The curtain measures 3 feet wide by 5 feet and 1/2 inches long.

Cameo Space Divider:

This unique wall or room divider brings elegance and lightness to any room. The cascading curtain from the ceiling is made of full-grain leather. This modular screen is also available in top-grain leather with dimensions of 28cm high by 23cm wide. The standard 9 pieces in 4 columns are tied together using steel rings with chromed steel support. This curtain is useful in both residential and commercial applications. The partition wall version comes with standard measurement of 262cm high and 101.5cm wide and in many color choices.

Hanging curtain room dividers vary in prices depending on options so it is recommended that you compare features and prices before making a buying decision.

For more info concerning Hanging Curtain Room Dividers, visit http://www.interiorroomdividers.com.